Hylo-Care Eye Drops 7.5ml

The usual dose is one drop in each eye, three times per day. Can be used more frequently if desired. Priming the system: To prime the system remove the over cap and invert the Hylo-Care bottle with its tip pointing down. Place two fingers on the base and your thumb on the shoulder of the bottle and press firmly on the base and release. Repeat this several times until the first drop is released. Now the bottle is primed. General use: Remove the over-cap and invert the Hylo-Care bottle with its tip pointing down. Support the hand holding the bottle with the other hand. Hold the bottle as previously shown. With your head leaning back slightly, pull down your lower eyelid. Press the base of the bottle. This enables the bottle to release one drop into the conjunctival sac. Release and repeat for the other eye. After each application slowly close your eye to allow the fluid to spread evenly over the eye surface. The design of the COMOD valve system ensures that the size and speed of each drop are the same regardless of the pressure applied to the base of the bottle. During use please avoid any contact between the tip of the bottle and your eye or your skin. Before replacing the over-cap please ensure that the tip is dry.